Prepare the panel
Wash the vehicle, then wipe each panel with an isopropyl alcohol (IPA) solution so it is free of wax, dust and oil. Work out of the wind and direct sun.
INSTALLATION GUIDESTake your time.
Take your time.
Get the prep right.
A useful starting checklist—not a substitute for vehicle-specific instructions, training or professional fitting. Follow the guide included with your confirmed kit.
Test fit every piece
Match each pre-cut piece to its panel and check the fit before you remove any backing.
Wet everything with slip solution
Spray your fingertips and the panel, peel the backing and spray the adhesive side generously so the film can slide.
Position and anchor
Float the piece into place, line up the edges, then anchor the centre with a little tack solution.
Squeegee from the centre out
Use firm, overlapping strokes to push the solution out towards the edges, without overstretching the film.
Finish the edges and let it cure
Push out any remaining moisture at edges and corners, then leave the film to cure and avoid washing the vehicle for the time stated in your kit instructions.
Not sure about a panel, pattern or installation step?
Stop and ask before proceeding. A professional studio fit can be the right path for complex panels or first-time installers.
Book an In-Store ConsultationYOUR PROJECT, PLANNED WITH CONFIDENCE
Need a hand with the install?
Bring your questions, ideas and inspiration. We'll help you work out the right next step.